![]() These engines will run most of the time in the 3000~4500 rpm range. The valves are stainless with a 3: angle valve job.nothing exotic. The heads are stock Vortec with Comp springs and retainers, port matching and mild cleaning of burrs in the intake passages. Ignition is Delco Voayger with 32 deg total advance. These numbers were attained running a Holley 750 CFM Marine Double Pumper on an Edelbrock Volvo/Penta High Rise/Dual Plane Marine aluminum intake with brass lined water passages. These engines were run in on the dyno and made 365 horse power at 5000 RPM.390 horsepower at 5600 RPM. I will get the cam cards out and post the numbers. I went instead with a Comp Cams Extreme Marine Roller with Comp Needle Bearing rockers. Thanks.I just bought a pair of 355 Marine Vortecs for my 255 Formula and considered the LT4 cam. Has anyone done this? If so, what was the result? I am thinking of repacing the stock truck roller cam with an LT4 Hot Cam. ![]() I have a longer term plan to build a 383 stroker, but in the interim I have picked up a solid 元1 Vortec 350 from a 20 Van - I am going to clean it up and do marine gaskets in it. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |